Linear temperature sensor with plug and play harness

$74.95

The Autosport Labs Linear Temperature Sensor offers a linear response of 10mv/C for easy calibration with a simple conversion formula.

Only ground, 5v, and output connections are required, with no pullup resistor needed – similar to other active sensors. The sensor is suitable for fluids such as oil, coolant and water.

Provided with M8 plug and play harness connector.

The Autosport Labs Linear Temperature Sensor offers a linear response of 10mv/C for easy calibration with a simple conversion formula.

Only ground, 5v, and output connections are required, with no pullup resistor needed – similar to other active sensors. The sensor is suitable for fluids such as oil, coolant and water.

Provided with M8 plug and play harness connector.

Mechanical

  • 1 Meter cable length

  • 1/8″ NPT fitting

  • Body: Stainless Steel

  • 13mm (1/2″) hex head

Electrical

  • Voltage supply: 3-5V

  • Pull-up resistor: None (Active element)

  • Operational temperature range: -40 to 150C

  • Calibration: Linear response 10mv/C; 0.5V at 0 degrees C

  • M8 Pinout:

    • Pin 4 : signal

    • Pin 1: Ground

    • Pin 3: 5V

  • Wiring color codes:

    • Green: Ground

    • Red: 3-5V

    • Yellow: Signal Output

You Might Also Like